If you are looking to photography wildlife with some of the best third party lens hoods on the market, then you may want to consider the Panasonic Lumix GH4 Body & lenses. This camera is equipped with a variety of advanced glass and weather sealing mechanics that make it one of the most durable and reliable options on the market. With a wide range of focal lengths and a large sensor, it offers plenty of opportunity for capturing beautiful, life-like images.
What is a third party lens hood and why should you buy one?
JJC LH-DA18 Professional Hard Lens Hood for Tamron 18-250mm f/3.5-6.3 Di-II LD Lens (Model A18) 18-270mm f/3.5-6.3 Di-II VC PZD Lens (Model B008) Replaces Tamron DA18
- JJC LH-DA18 Professional Hard Lens Hood for Tamron 18-270mm & 18-250mm Replaces Tamron DA18
- Hard Lens Hood . Protects your lens and reduces flare
- Professional Hard Lens Hood for Tamron
- Easy to remove and attach.
Haoge LH-S20B Bayonet Square Metal Lens Hood Shade with Cap for Sony FE 20mm F/1.8 G SEL20F18G Sony 20mm f1.8 Wide Angle Prime Lens
- The LH-S20B Square Metal Lens Hood is designed for Sony FE 20mm F1.8 G SEL20F18G Lens.
- The lens hood is equipped with a cap.
- Helps Block Stray Light and Reflections.
- Provides Greater Protection to Lens.
Punch Shot
- Amazon Prime Video (Video on Demand)
- Ashraf Elsayegh, Kaila Elsayegh, Teresa Merced (Actors)
- Nicholas T. Holden (Director) – Blake Wilding (Producer)
- English (Playback Language)
- English (Subtitle)
A third party lens hood is a device that is used in conjunction with a camera gear to protect the lens from scratches or other damage. By using a third party lens hood, you can increase your chances of having reliable photography experiences and maintain your equipment in top condition.
Comparison chart for best third party lens hood [2022]
Top 20 best third party lens hood Review with Buying Guides
JJC Camera Lens Hood Shade for Canon EF-M 15-45mm f/3.5-6.3 is STM & RF-S 18-45mm f/4.5-6.3 is STM Lens on Canon EOS R100 R50 M50 M50 Mark II M5 M6 Mark II M200 M100 Replaces Canon EW-53 Hood-Sliver
- Compatibility: The lens hood shade for Canon EF-M 15-45mm f/3.5-6.3 IS STM lens and Canon RF-S 18-45mm f/4.5-6.3 IS STM Lens on Canon EOS R100, R50, R7, R10, M50, M50 Mark II, M5, M6, M6 Mark II, M200, M100, M10 cameras.
- Replacement: Replace Canon EW-53 lens hood.
- Flexibility: Ф49mm filter and Ф49mm lens cap are allowed to attach.
- Professional Design: Non-glare matte finish on the interior surface to further prevent or limit lens flare. No vignetting with the hood on.
- Protection: Protects your lens from accidental impact and the elements.
Canon ES-71 II Lens Hood for Canon 50mm F1.4 Lens
- Product Type :Camera Lenses
- Package Dimensions :4.318 Cm L X9.144 Cm W X9.398 Cm H
- Country Of Origin :Japan
- Package Weight :0.13Lbs
50mm Reversible Lens Hood Shade Fit for Canon EF 50mm f/1.8 STM Lens Replaces Canon ES-68 Hood Tulip Flower Design -Black
- Compatibility: The dedicated lens hood is designed for Canon EF 50mm f/1.8 STM lens, replaces Canon ES-68 Hood.
- Flexibility: Ф49mm filter and Ф49mm lens cap are allowed to attach.
- Professional Design: Non-glare matte finish on the interior surface to further prevent or limit lens flare. No vignetting with the hood on.
- Protection: Protects your lens from accidental impact and the elements.
- Note: Not for RF 50mm Lens, Not for Canon EF 50mm f/1.8 Lens or Canon EF 50mm f/1.8 II Lens.
JJC Camera Lens Hood Shade Fits for Canon RF 75-300mm f/4-5.6, EF 75-300mm f/4-5.6 III USM & EF-S 55-250mm f/4-5.6 is II Lens, Replaces Canon ET-60 Hood Reverse Attaching -Black
- Compatibility: The lens hood is dedicated to Canon RF 75-300mm f/4-5.6 lens, Canon EF 75-300mm f/4-5.6 III lens, Canon EF 75-300mm f/4-5.6 III USM lens, Canon EF-S 55-250mm f/4-5.6 IS lens and Canon EF-S 55-250mm f/4-5.6 IS II lens, replaces Canon ET-60 hood.
- Flexibility: Ф58mm filter and Ф58mm lens cap are allowed to attach. Reversible design could be storage easily.
- Professional Design: Non-glare matte finish on the interior surface to further prevent or limit lens flare. No vignetting with the hood on.
- Protection: Protects your lens from accidental impact and the elements.
- Warm Tips* It’s not compatible with Canon EF 75-300mm f/4-5.6 IS USM lens or Canon EF-S 55-250mm f/4-5.6 IS STM lens.
FEICHAO Universal Len-s Folding Hood Anti-Reflective Silicone Hood for DSLR Camera Photography Equipment Accessories (Size S)
- Functional Use: Size S is suitable for outer diameter lenses with a diameter of 53-72mm. Size M is suitable for outer diameter lenses with a diameter of 72-112mm.
- Foldable Storage: The hood is easy to pack, install and use. It can also be folded for storage.
- Anti-reflective: Can eliminating glass reflection for better shooting results.
- Function Effect: Silicone material, it can be used as a “protective shield”, protect the camera lenses from knocks.
- Silicone Material: Made of silicone material, easy to fold and store; effectively protect the lenses.
JJC ET-74B Bayonet Dedicated Lens Hood Shade for Canon RF 100-400mm f/5.6-8 is USM and EF 70-300mm f/4-5.6 is II USM Lens, Replaces Canon ET-74B OEM Lens Hood
- Made of premium ABS material, reversible design allows you to mount the hood in reverse for compact storage
- Minimizes flare and ghosting by blocking out stray light
- Protects your lens from accidental impact and the elements
- It replaces Original Canon ET-74B Lens Hood
- It fits for Canon RF 100-400mm f5.6-8 IS USM and Canon EF 70-300mm f4-5.6 IS II USM lens
Reversible Lens Hood Shade Protector for Canon EF 75-300mm f/4-5.6 III USM & EF-S 55-250mm f/4-5.6 is II & RF 75-300mm f/4-5.6 Replace ET-60 On 5D Mark IV III 7D 6D Mark II 90D 80D Rebel T8i T7i T7
- It fits Canon EF 75-300mm f/4-5.6 III, EF 75-300mm f/4-5.6 III USM, EF-S 55-250mm f/4-5.6 IS, RF 75-300mm f/4.0-5.6, EF-S 55-250mm f/4-5.6 IS II lens.
- It replaces Original Canon ET-60 Lens Hood
- Made of high quality ABS material, reversible design allows you to mount the hood in reverse for compact storage
- Minimizes flare and ghosting by blocking out stray light，it also allows the use of original 58mm lens caps and filter.
- Protects your lens from accidental impact
ET-60 Lens Hood Shade for Canon EF 75-300mm, EF-S 55-250mm f/4-5.6 III & HUIPUXIANG 58mm Lens Hood
- ※ Compatible for Canon EF 75-300mm f/4-5.6 III,EF 75-300mm f/4-5.6 III USM.
- ※ Compatible for Canon EF-S 55-250mm f/4-5.6 IS【Not for EF-S 55-250mm F4-5.6 IS STM】,EF-S 55-250mm f/4-5.6 IS II.
- ※ Compatible for Canon EF 90-300mm f/4.5-5.6 USM.
- ※ Made of high-quality plastic ABS material，Colour: Black.
- ※ Function: The Item helps to protect the lens to prevent other objects from accidentally injuring it. Improve the quality of photos and avoid beautiful pictures from being disturbed by outside light.
Camera Lens Hood Shade for Canon EF 24-70mm f/2.8L USM Lens Replaces Canon EW-83F Hood Compatible with 77mm Filter and Lens Cap Reversible Design
- Compatibility: This reversible bayonet lens hood is only designed for Canon EF 24-70mm f/2.8L USM lens (Version I). Note* this lens hood is not compatible with the EF 24-70mm f/2.8L II USM (Version II) and EF 24-70mm f/4L IS USM.
- Replacement: Replaces Canon EW-83F hood.
- Reversible: It can be placed backwards over the lens for easy storage. It allows you to put on a Ф77mm filter and a Ф77mm lens cap.
- Professional Design: Non-glare matte finish on the interior surface to further prevent or limit lens flare. No vignetting with the hood on.
- Protection: Protects your lens from accidental impact and the elements.
Easy Hood Lens Hood for Nikon Canon Pentax Sony 70-90mm Camera Lens, Ultimate Anti-Glass Anti-Reflective Silicone Collapsible Len Hood Take Reflection-Free Photos Video (70mm)
- ★MULTI-FUNCTIONS – The main function is to avoid reflection when photographing & shooting through glass / windows. It also offers some additional features. Pull it backwards, it also can be used as a “protective shield”, protects against scratches, splash, snow, dust, mud.
- ★WIDE APPLICATIONS – Whether you’re shooting through a hotel window, a skyscraper observation deck, the window of a bus or a zoo enclosure, this lens hood makes a big difference and turns a bad photo into a great one even before you start editing!
- ★SIZE – Ultimate lens hood made of silicone and will stretch fit to any lens with 70mm-90mm diameter.
- ★PORTABLE – Removing glare by day and reflections by night, can be used any time you need it. Lightweight and portable, easy to carry and use.
- ★EASY TO USE – Fit your lens, rather than attaching to the glass. This means you’re free to move around, change your angle and adjust your camera settings without having to detach anything.
JJC Reversible Dedicated Lens Hood Shade Protector for Canon EF 35mm f/2 is USM Lens Replace Canon EW-72 Lens Hood on EOS 5D Mark IV III II 6D Mark II 7D Mark II 5Ds R 90D 80D 77D Rebel T7i T8i T7 SL3
- For Canon EF 35mm f/2 IS USM Wide-angle Lens only, not for Canon EF 35mm f/1.4 and Canon EF-S 35mm f/2.8 lens
- Reversible to stay on lens, replaces Canon EW-72 lens hood
- Prevent unwanted stray light from entering the lens
- Non-glare matte finish on the interior further preventing lens flare
- Extra protection from accidental impact
JJC EW-73D Lens Hood Shade for Canon EF-S 18-135mm f/3.5-5.6 is USM Lens, Canon RF 28-70mm F2.8 is STM Lens & RF 24-105mm f/4-7.1 is STM Lens, Lens Protector Replaces Canon EW-73D Hood
- The JJC EW73D Lens Hood is dedicated to Canon EF-S 18-135mm f3.5-5.6 IS USM Lens, Canon RF 28-70mm f2.8 IS STM Lens and Canon RF 24-105mm f4-7.1 IS STM Lens. It replaces Canon EW-73D Original Hood. (Note* It’s NOT compatible with Canon EF-S 18-135mm f3.5-5.6 IS STM Lens, Canon EF-S 18-135mm f3.5-5.6 IS Lens, Canon RF 24-105mm f4 L IS USM Lens.)
- The lens hood is available to attach a Ф67mm filter and a Ф67mm lens cap.
- Non-glare matte finish on the interior surface of the lens hood helps to minimize flare by deflecting stray light from entering the lens and no vignetting with the hood on.
- The tulip lens hood is reversible design, allowing you to place it backwards over the lens for a more compact storage solution.
- The lens shade also provides additional protection to the lens from accidental impacts, bumps, or scratching.
Andoer Lens Hood, ET-60II Flower Lens Hood for Canon EF 75-300MM F/4-5.6 III EF-S 55-250mm f/4-5.6 is
- Flower shaped design reduces vignetting effect.
- Effectively eliminates unwanted flare.
- Prevent glare by stopping light from coming into the lens at side angles.
- Improves contrast and image quality.
- Protect your lens from minor impact.
72mm Set of 2 Camera Lens Hoods and 1 Lens Cap – Rubber (Collapsible) + Tulip Flower – Sun Shade/Shield – Reduces Lens Flare and Glare – Blocks Excess Sunlight for Enhanced Photography and Video
- ✅ ESSENTIAL DSLR CAMERA ACCESSORY ►This set contains 2 rubber camera lens hoods that are compatible with all 72mm lenses. It also contains a lens cap. Always verify your camera’s lens thread size before ordering. The correct Ø diameter value can be found on the front of the lens or underneath the lens cap.
- ✅ BLOCKS EXCESS SUNLIGHT ►The lens hoods will block excess sunlight for enhanced photography and video footage. They will reduce lens glare and flare and boost the black in your pictures.
- ✅ COLLAPSIBLE IN 3 STEPS ►The rubber lens hood can be folded out in 3 steps to offer different levels of sun shading. Because the rubber lens hood can be fully collapsed, you can leave it on your lens so you can always use it when you need it.
- ✅ TULIP FLOWER HOOD ►The shape of the tulip flower lens hood is ideal for wide angle lenses. It offers a maximum amount of shading without causing vignetting.
- ✅ NEED MORE? ►Other CamKix accessories are available to protect, clean or enhance the pictures and video footage of your DSLR or phone camera.
Camera Lens Hood – Rubber – Set of 2 – Collapsible in 3 Steps – Sun Shade/Shield – Reduces Lens Flare and Glare – Blocks Excess Sunlight for Enhanced Photography and Video Footage
- ✅ ESSENTIAL DSLR CAMERA ACCESSORY ►This set contains 2 rubber camera lens hoods that are compatible with all 58mm lenses. It also contains a lens cap. Always verify your camera’s lens thread size before ordering. The correct Ø diameter value can be found on the front of the lens or underneath the lens cap.
- ✅ BLOCKS EXCESS SUNLIGHT ►The lens hoods will block excess sunlight for enhanced photography and video footage. They will reduce lens glare and flare and boost the black in your pictures.
- ✅ COLLAPSIBLE IN 3 STEPS ►The rubber lens hood can be folded out in 3 steps to offer different levels of sun shading. Because the rubber lens hood can be fully collapsed, you can leave it on your lens so you can always use it when you need it.
- ✅ EASY TO INSTALL ►The rubber lens hoods are very easy to install. Just screw the lens hood onto the 52mm thread of your DSLR camera lens. The original lens cap of your lens will fit back onto the rubber lens hood.
- ✅ NEED MORE? ►Other CamKix accessories are available to protect, clean or enhance the pictures and video footage of your DSLR or phone camera.
Fotodiox Reversible Lens Hood Kit for E-Mount PZ 16-50mm F3.5-5.6 OSS E-Mount Power Zoom Lens, Reversible Tulip Flower Hood w/Cap
- 40.5mm & 52mm Front Threads for Filters and Lens Cap
- Hood Is Easily And Quickly Reversible On The Mounting Ring
- Increase Color And Saturation By Reducing Lens Flares And Glares
- Protection From Accidental Impact, An Essential Add-on For Your Camera
- 24-Month Manufacturer Warranty
EW-60F Lens Hood for Canon RF-S 18-150mm F3.5-6.3 is STM on EOS R7 R10, EF-M 18-150mm f/3.5-6.3 is STM on EOS M5 M6 M50 Camera (for Accessories),HUIPUXIANG 55mm Lens Hood
- ※ Compatible with Canon RF-S18-150mm F3.5-6.3 IS STM.
- ※ Compatible with Canon EF-M 18-150mm f/3.5-6.3 is STM.
- ※ Made of high-quality plastic ABS material，Colour: Black.
- ※ Function: The Item helps to protect the lens to prevent other objects from accidentally injuring it.
JJC 37mm Screw in Lens Hood Shade for Olympus M.Zuiko Digital ED 14-42mm EZ Lens Used on OM-D E-M10 III/E-M10 II,etc & Panasonic Lumix G Vario 12-32mm ASPH Lens on DMC-GX85/DMC-GX850,etc – Black
- It fits Olympus M.ZUIKO DIGITAL ED 14-42mm f/3.5-5.6 EZ Lens & Panasonic Lumix G Vario 12-32mm f/3.5-5.6 ASPH. Lens
- Compatible with a 37mm center pinch snap-on lens cap and a 37mm filter
- Easy to install and works flawlessly, just screws the hood onto the front of the lens
- Minimizes flare and ghosting by blocking out stray light & Protects your lens from accidental impact and the elements
- Made of premium quality aluminum
Fotasy 37mm Metal Wide Angle Lens Hood for Canon, Fuji, Leica, Leitz, Nikon, Olympus, Panasonic, Pentax, Sony Lens
- Metal lens shade for 37mm filter thread wide angle lenses, will screw into your Lens, or filter.
- Solid metal construction, with flat Black interior to prevent Reflections.
- Ensures no problems with igniting or motor functions.
- The 37mm screw-in lens hood fits lens with 37mm filter diameter only. Please verify your Lens thread size/ filter diameter before ordering.
- Lens thread size will be Marked somewhere on the Lens barrel or printed underneath your Lens cap. This number is always preceded by a “Ø” (Diameter) symbol. For example: ø37 = 37mm lens thread size.
What to Think Before Buying best third party lens hood
Before making any purchase of a third party lens hood, one should consider the purpose of the lens hood. A lens hood is a piece of equipment that helps protect your optics from the elements and can also allow you to shoot in more natural light. Some good reasons to purchase a third party lens hood include photography purposes such as shooting in low light or capturing candid moments, as well as professional purposes such as broadcast or editorial work.
What is a lens hood?
A lens hood is a piece of equipment that helps protect your lens from the sun’s heat and light. Lens hoods are available in a variety of styles and sizes, so you can find one that will fit your specific camera and photography needs.
Why should you buy one?
When you purchase a 3rd party lens hood, you are getting an extra layer of protection against the sun and rain. This is especially important if you are shooting in bright or noisy conditions. By using a quality 3rd party lens hood, you can avoid any potential damage to your camera or lens.
Types of lens hoods:
Types of lens hoods available to consumers vary depending on what type of camera or lens you are using. Some hoods are designed to protect the optics from dust, sunlight, and other elements, while others are designed to keep your lens looking its best.
Lens hoods come in a variety of shapes and sizes, so it can be hard to determine which one is right for you. Here’s a breakdown of the different types of hoods available to consumers:
1) Open-cell hood: These hoods use small cells that allow air and light to flow through while trapping dirt and dust. This type of hood is perfect if you are shooting in bright sunlight or if you need to keep your camera clean often.
2) Closed-cell Hood: These hoods use large cells that trap all the air and light within their confines.
The best type for your camera
There are many different types of lens hoods on the market, but which one is the best for you? Here are some tips to help figure out which type of hood is right for you:
When looking to buy a lens Hood, it is important to consider what type of camera you own. If you own a DSLR Camera, then a lens hood will protect your lens from scratches and other damage. However, if you own an Olympus or Panasonic Lumix Camera, then a lens hood won’t do as much good.
For DSLR Cameras: A lens hood can protect your lenses from scratches and damage.
For Panasonic Lumix Cameras: A lens hood cannot protect your lenses from scratches and damage.
How to choose the right lens hood for your camera?
There is no one-size-fits-all answer to this question, as the type of lens hood you choose will depend on your specific camera and photography needs. However, here are four tips to help you make the best decisions:
1) Consider what type of camera you own: a DSLR or mirrorless camera? If you have a traditional DSLR or mirrorless camera, then you will want to buy a lens hood specifically designed for that type of camera.
2) Consider your needs: do you use shooting in low light or high light situations often? If so, then you may want to consider purchasing a lens with an optical zoom feature. Additionally, if you frequently take pictures of moving subjects or need an effective lens cover that can protect your camera against fingerprints and other dirt and dust buildup, then a physical lens cover may be necessary.
Conclusion
Lens hoods are a necessity for any photographer, but it can be difficult to find the right one. Look no further than 3rd party lens hoods! These Hoods come with a variety of features that make them an ideal choice for photographers.